From tree stand hunting, spot and stalk hunting, competing at the range, target shooting or plinking with the kids, this mount will allow you to use a red dot on just about any Ruger Revolver.
Ultra slim design at only 1/8” keeps the red dot as low as possible on the gun. By design our mount incorporates both the rear sight screw and rear sight cross pin. The only mount on the market that uses the rear sight cross pin for ultimate strength. Similar to magnum rifles with cross bolts through the stock, the recoil force transferred is shared among both points, ensuring a single screw is not responsible for solo duty. The cross pin also prevents any twisting or rotating of the mount, ensuring any bumps along the trail have no impact on changing your zero.
But the features don’t stop there. Our mount comes with a special Shim Pack designed to tailor fit the mount to your specific gun. We are talking adjustments as small as 0.001″! This level of fit has previously only been seen in custom gunsmith one off pieces that would costs hundreds of dollars.
Even though all these models use the exact same rear sight, the tolerance difference between them is fairly significant. Especially when you consider these guns have been made during a 50 or 60+ year timeframe. Having a mount that can twist or rock from side to side is not a step in the right direction. Expecting one screw to control all lateral movement of the mount under recoil is irrational. The first step to mitigate that is using the rear sight cross pin and the next step is using our Shim Pack. Being able to custom tailor the part to your specific gun means you have the best fitting mount possible.
“Anything worth doing, is worth doing right.” – Hunter S Thompson
If you are inclined to drill and tap your gun for an additional screw but can’t bear the thought of ‘defacing’ your precious six gun, don’t worry, you’re not alone. That’s why we made provisions for a second screw tucked inside the rear sight pocket. Especially for those shooting full house loads and big bores with monster recoil. Maintaining the original outward appearance of the gun is important to us, especially if you wanted to go back to open sights or preserve resale value.
Fits Ruger Blackhawk (including .357 Maximum), Super Blackhawk, Super Blackhawk Hunter, Redhawk, Redhawk Hunter, Super Redhawk, Super Redhawk Alaskan, GP100*, Super GP100, GP100 Match Champion*, Security Six, Single Six, Single Six Hunter, Single Seven, Single Nine, Single Ten
(*Will not fit revolvers with Novak style or fixed rear sights)
If your optic is not listed below, please contact us for clarification on fitment
This mount only accepts red dot sights with the Docter/Noblex footprint:
- Vortex Venom
- Vortex Viper
- Burris Fastfire 2, 3, 4
- Springfield HEX Dragonfly
- Various others including Crimson Trace, ADE, etc
- Made from 7075-T6 Aluminum
- Black Anodized
- Mounting screw included
- Incorporates rear sight cross pin for added strength
- Shim Pack allows for precision fitment tailored to your specific gun
- Provision for an additional screw inside the rear sight pocket
- Ultra slim design keeps the sight as low as possible
- Fits Vortex Venom, Vortex Viper, Burris Fastfire 2, 3, 4, and Springfield HEX Dragonfly red dots
- Utilizes the Docter/Noblex footprint
100% designed and manufactured in Spokane, Washington
Will not fit Flattop Blackhawks, Vaquero, Bearcat, Wrangler, LCR, SP101, Service Six, or Speed Six. See our other mount for Flattop Blackhawks.
If you are unsure if this will fit your gun or red dot, please contact us for assistance.
*Red dot sight and revolver are not included in sale
*Due to the variances in Ruger’s manufacturing, there may be slight discrepancies from gun to gun, depending on if you have a Monday built gun or a Friday built gun, some fitting may be required.
*Once the cross pin hole is drilled it may or may not line up on another gun if you wish to later swap mounts between guns.